When it comes to HVAC systems, properly maintained equipment operates more efficiently & lasts longer.
The HVAC Maintenance Plan from Eyman Plumbing Heating & Air is a great way to save money on your HVAC maintenance and ensure that your systems are in proper working order for optimal efficiency.
- 1 Fall Heating Preventative Maintenance Check
- 1 Spring Cooling Preventative Maintenance Check
- Priority Service
(including nights, weekends, holidays) - 10% Off Emergency Service Calls
- 10% Off Labor
- 10% Off All Parts
(Discounts Apply to All Eyman Services) - Free 1” Furnace Filter at time of cleaning
- 22 Point A/C Cleaning & Inspection
- 22 Furnace Cleaning & Inspection
$180/year
Tax not included. Price covers 1 HVAC system only. 2 Systems: $280/yr. 3 Systems: $380/yr. Heat Pumps are an additional $20 per heat pump. Humidifier pad and any filter over 1 inch is chargeable. Geo-Thermal system service and radiant system service is also available upon request.
Customer acknowledges the equipment being serviced has been in operation and can fail at any time for reasons unrelated to maintenance service; thus waives and releases Eyman Plumbing Inc. from liability from such failures.
Maintained equipment operates more efficiently & lasts longer.
402-731-2727
The Basic Residential Maintenance Plan Includes:
A/C Cleaning & Inspection
❏ Check Thermostat & Batteries | ❏ Check & Wash Condenser Coil |
❏ Check Blower Motor & Amps | ❏ Check Condenser Fan Blade |
❏ Check & Flush Condensate Drain | ❏ Check Refrigerant Levels |
❏ Check Capacitors | ❏ Check Compressor |
❏ Check Motor Belt | ❏ Visual Inspection of Refrigerant Piping |
❏ Check Motor Bearings | ❏ Measure Temperature Drop |
❏ Check & Lubricate Motor as Needed | ❏ Inspect Registers |
❏ Check & Replace Standard 1″ Filters | ❏ Examine Equipment Condition Area & Clearances |
❏ Check & Tighten Electrical Connections | ❏ Check Refrigerant Caps |
❏ Check Evaporator Coil | ❏ Shut Down Humidifier & Replace Pad |
❏ Check the Cleanliness Inside the Units | ❏ Report adverse conditions |
Furnace Cleaning & Inspection
❏ Check Thermostat & Batteries | ❏ Inspect Registers |
❏ Check Circulating & Combustion Blower | ❏ Check Combustion Air Source |
❏ Check Motor Belt | ❏ Check Electrical Connections |
❏ Check Motor Bearings | ❏ Check Combustion |
❏ Oil Motors as Needed | ❏ Check Temperature Rise |
❏ Check & Replace Standard 1″ Filters | ❏ Check Condensate Drain & Clean |
❏ Check Pressure Switch Tubing | ❏ Check Ignition System & Safeties |
❏ Check BTU Input to Furnace | ❏ Check Clearance to Combustibles |
❏ Check Fan Control | ❏ Perform Carbon Monoxide Test |
❏ Check Heat Exchanger | ❏ Check Humidifier |
❏ Check & Clean Burners | ❏ Report adverse conditions |